Circular Saw Blade Carbide for WOOD with NAILS
10 inch 60 Tooth
Arbor Size=1" to 5/8" with included shim
Tungsten Carbide Tipped
Suitable for circular saw, table saw, chopsaw, miter saw & skilsaw

This blade has a 1" arbor and comes with arbor shim to adapt to a 5/8” arbor.  
ATB (alternate top bevel) For cutting wood with embedded nails, 
for demolition work or dismantling pallets. 
Cuts through wood with nails like butter!

TC161N CIRCULAR SAW BLADE SPECIFICATIONS

DESCRIPTION:  10"*60T*25.4*1.8 with washer 15.88
(wood and nail circular saw blade)
BODY: 1.8mm 50 steel with hardness of 42, surface flatness is within 5 wires.
TOOTH: 5.5*1.8*3.1mm Main components are tungsten and cobalt 
(International number is YG6) Formula is 6% cobalt, 94% tungsten.  
The tooth hardness is 91.  Design is a compromise to make it harder to break 
the tooth while staying sharp for cutting pallet wood.
TIP: tip size OKE  55*18*31mm,body thickness 1.8mm
CARBIDE:  YG6
TOOTH WELDING: Copper with a brazing temperature of 450 centigrade. 
CLICK HERE for other Saw Blades

WARNING! To prevent serious injury ALWAYS wear eye, face & body protection.

Click here for Safety Products